Finishing the Sill

This is the welding up of the sill in front of the B-post. This is the left-hand side of the car so has the wiring loom running along the sill and through the foot of the B-post.
You may be able to make out a small piece of steel I bent up to create a bridging piece, which I had to use to guide the B-post over the wiring loom. The picture shows it slid forwards prior to removal.
I had to clamp the outer skin of the sill to close the gap before welding. The clamp was moved along bit by bit ahead of the welding to keep everything snug. This is of the right hand side, just to keep you on your toes!
Here is the rear door opening, all welded up.